Lam Technologies
CNV30 Serisi Çeviriciler ve Arayüzler (Converters and interfaces)
Ray Montajlı İzole Seri Çeviriciler ve Arayüzler
CNV30 serisi dönüştürücüler endüstriyel ortamlarda montaj için tasarlanmış ve yüksek ve sürekli performans elde etmek için dijital teknoloji ile gerçekleştirilmektedir. Kompakt boyutu, hızla DIN rayı üzerine monte edilebilir.
CNV3010 – RS232 – RS485 Endüstriyel Arayüz
CNV3010 arabirimi bir RS232’yi RS485 line dönüştürür ve bunun tersi de geçerlidir. Çeşitli ayar olanakları sayesinde, CNV3010 sınırsız sayıda uygulamada kullanılabilir.
- RS232 port and RS485 line optocoupled between them and from the power supply (triple insulation >1KV)
- Easy DIN rail mounting
- Electrostatic discharges protection up to 15KV
- Separate RS232 connectors for DTE and DCE
- Removable terminal blocks for an easy connection
- RS485 enable mode manually and automatically selectable
- Automatic enable mode extremely accurate, reliable and repeatable
- RS485 manual enable mode signals selectable through RTS or DTR
- RS485 polarization integrated and settable
- RS485 termination integrated and settable
- Baud Rate selectable from 110baud up to 320,400baud in 11 different values
- 7- and 8-bit formats support, with 1 or 2 stop bit, with or without parity
- Auto baud rate mode for the automatic and dynamic configuration of speed and format
- Auto baud rate mode for speed and non-standard formats support
- 3 status LED indicators
- Fully digital design
- Accessories available
CNV3013 – USB – RS232 Endüstriyel Arayüz
CNV3013 arayüzü, bir PC’nin USB portunu kullanarak bir RS232 asenkron seri hattını gerçekleştirir. Birlikte verilen aygıt sürücüsü aracılığıyla arayüz, işletim sistemi tarafından standart bir sistem seri portu olarak tanınır. USB ve RS232 portları arasındaki elektrik yalıtımı, yüksek düzeyde gürültü bağışıklığı verir ve toprak devreleriyle ilgili sorunları ortadan kaldırır.
- USB port and RS232 line optocoupled between them (>1KV)
- Easy DIN rail mounting 9 Electrostatic discharges protection up to 15KV
- Separate RS232 connectors for DTE and DCE
- Removable terminal blocks for an easy connection
- Standard USB port 1.1 and 2.0 compatible
- Designed for Windows 98, SE, Me, 2000 and XP
- LINUX supported in native mode with kernel version 2.4.0 or more
- Multiple connection of more CNV3013 units to the same PC possible
- Virtual serial port driver to make the CNV3013 a standard system serial port
- Power supply taken from the USB port
- Wide reception and transmission buffer (>128byte)
- Baud rate selectable from 110baud up to 320,400baud in 11 different values
- 7- and 8-bit formats support, with 1 or 2 stop bit, with or without parity
- Parity formats selectable among odds, evens, mark or space
- 3 status LED indicators
- Fully digital design 9 Accessories available
CNV3020 – Endüstriyel RS232 Hat Genişletici
Hat genişletici CNV3020, Kontrol sinyalleri dahil RS232 standart portuna özgü tüm sinyalleri çok uzun mesafelerden ve çok uzun mesafelere, sadece basit bir çift bükümlü kablo kullanarak iletmeye ve almaya izin verir.
- RS232 port and RS485 line optocoupled between them and from the power supply (triple insulation >1KV)
- Easy DIN rail mounting
- Electrostatic discharges protection up to 15KV
- Separate RS232 connectors for DTE and DCE
- Removable terminal blocks for an easy connection
- Each RS232 line extension (RX, TX, RTS, CTS, DSR, DCD, DTR, RI)
- Physical connection through a simple twisted pair cable
- Full-duplex communication supported
- No calibration or setting required
- Wide reception and transmission buffer (>128byte)
- Baud rate up to 56,600baud. Non standard baud rate support. Any format support
- 3 status LED indicators
- Fully digital design
- Accessories available
CNV3023 – USB Port Üzerinden Endüstriyel RS232 Hat Genişletici
Hat genişletici CNV3023 bir PC’nin USB portuna bağlanabilir ve RS232 port emülasyonu yoluyla, RS232 standart portuna özgü tüm sinyalleri, kontrol sinyallerini, çok uzun mesafelere sadece basit bir çift bükümlü kablo kullanarak alıp göndermeye izin verir.
- USB and transmission lines insulated ( >1KV )
- Easy DIN rail mounting
- Electrostatic discharges protection up to 15KV
- Removable terminal blocks for an easy connection
- Each RS232 control line extended (RX, TX, RTS, CTS, DSR, DCD, DTR, RI)
- Physical connection through a simple twisted pair cable
- Full-duplex communication supported
- Standard USB port 1.1 and 2.0 compatible
- Designed for Windows 98, 2000 and XP
- LINUX supported in native mode with kernel version 2.4.0 or more
- No calibration or setting is required
- Virtual serial port driver to make the CNV3013 a standard system serial port
- Power supply taken from the USB port
- Wide reception and transmission buffer (>128byte)
- Baud rate selectable from 110baud up to 57,600baud. 7- and 8-bit formats support, with 1 or 2 stop bit, with or without parity (odds, evens, mark or space)
- 3 status LED indicators
- Fully digital design
- Accessories available
CNV3030 – USB – RS485 Endüstriyel Arayüz
- USB port and RS485 line insulated between them ( >1KV )
- Easy DIN rail mounting
- USB port 1.1 and 2.0 compatible
- Designed for Windows 98, SE, Me, 2000 and XP
- Standard system port emulation driver
- LINUX supported in native mode with kernel version 2.4.0 or more
- Electrostatic discharges protection up to 15KV
- Removable terminal blocks for an easy connection
- Power supply directly taken from the USB port (no auxiliary voltages required)
- RS485 enable mode manually and automatically selectable
- Automatic enable mode extremely accurate, reliable and repeatable
- RS485 polarization integrated and settable
- RS485 termination integrated and settable
- Independent reception and transmission buffer superior to 128byte
- Baud rate selectable from 110baud up to 921,600baud in 13 different values
- 3 status LED indicators
- Fully digital design
- Accessories available
Ürün teknik dokümanı için tıklayınız.
